Cart

  • No products in the cart.

Altelix 15x10x5 Polycarbonate + ABS Vented Weatherproof Enclosure with Aluminum Mounting Plate, 120 VAC 3-Prong Power Plug & Power Cord

Altelix 15x10x5 Polycarbonate + ABS Vented Weatherproof Enclosure with Aluminum Mounting Plate, 120 VAC 3-Prong Power Plug & Power Cord

Availability: Ships in 1 - 2 days
SKU: ALT.NP151005VA1C0C

Product Information

Documents

Vented Weatherproof Polycarbonate + ABS Construction For Extreme Durability

The Altelix NP151005VA1C-0C features two 3″ inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries.

Construction and Features
This enclosure includes a 2.0mm thick finished aluminum equipment mounting plate. The enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. It meets or exceeds NEMA 3R, 3RX and IP24.

120VAC Power
This configuration consists of the PC+ABS NEMA enclosure with hinged lid and a 2.0mm thick aluminum plate with a pre-wired 120VAC 3-prong power plug. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. A cable gland on the enclosure allows cables to be connected to internal devices. Additional cable glands are also provided on the enclosure for additional wiring.

Complete with Cable Glands and Wire Management Straps
This enclosure includes 3 weatherproof cable glands. Simply punch out the seal, run your cable, and hand tighten for a water-tight seal. For convenience, the included accessory kit contains wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.

Features

  • Two (2) 3″ Vents with Rain Shields and Screens
  • Features a 2.0mm Thick Finished Aluminum Equipment Mounting Plate with Pre-wired 120VAC Power Plug
  • Pre-wired 5 Foot Power Cord
  • Includes Cable Glands, Zip Ties, Hook & Loop Straps, Wall Mount Hardware
  • Meets NEMA 3R, 3RX and IP24
  • Weatherproof and UV Stable
  • Durable Polycarbonate + ABS
  • RF Transparent for Wireless Devices
  • Gasketed Lid
  • Tamper-Proof Locking Screw with Key and Provision for Padlock
  • External Dimensions: 15.8 x 11.4 x 6.2 Inches (401 x 290 x 158 mm)
  • Internal Dimensions: 9.8 x 8.0 x 3.8 Inches (248 x 203 x 97 mm)

Applications

  • Multi Purpose Plastic Utility Box
  • Data Wiring and Fiber Optic
  • Cable TV Connections
  • Broadband Demarc Enclosure
  • Low Voltage Wiring Junction Box
  • Outdoor Speaker Wiring
  • LED Controllers
  • IoT Devices
  • WiFi Gear
  • Security and Surveillance Systems
  • Outdoor Weather Protection
  • Protection Against Theft or Damage
  • Warehouses and Public Areas
  • Concealment of Equipment

Technical Specifications

Material Polycarbonate + ABS
Color Gray
Voltage 120VAC
Max Load 10A @ 120VAC
Outer Dimensions
(Height x Width x Depth)
15.8 x 11.4 x 6.2 Inches
(401 x 290 x 158 mm)
Inner Dimensions*
(Height x Width x Depth)
9.8 x 8.0 x 3.8 Inches
(248 x 203 x 97 mm)
Mounting Plate Material 0.08 in. (2.0mm) Aluminum
Weight 4.6 lbs. (2.0 kg)
Power Cord Length 5 Feet (1.5m)
Ratings Meets or Exceeds NEMA 3R, 3RX  and IP24
Flame Rating Meets UL94-V0
*Interior dimensions represent space available for equipment. See drawing for additional details.

 

Additional information

Weight 5 lbs
Dimensions 16 × 12 × 8 in

PVC-coated Products; PVC-coated Wires and Cables

WARNING: This product may expose you to chemicals including DINP and/or DEHP, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov or our information page: California Proposition 65 Info.