Introduction

The Platinum Tools TNC950DX Net Chaser is a powerful, fully-loaded network and cable tester that certifies Ethernet speeds up to 1Gbps. The TNC950DX essentially combines three tools in one: it tests for noise in the network, detects faults in the cable wiring and ensures cables and connectivity equipment are able to support the speed capabilities of the active network electronics.

In addition to testing and speed certification, the TNC950DX also features advanced network discovery which detects device ports and connections while effectively mapping the network.

The Net Chaser testing system is available in two models: the basic kit with a soft-style carrying case (part number TNC950AR) and the deluxe kit with a hard-style case and additional accessories (part number TNC950DX). All models feature the same testing and certification capabilities.

The TNC950DX is a vital and powerful tool for testing network performance, certifying network speeds and testing cable and connectors.

System Features

• Test and troubleshoot twisted pair network connections and configuration

• Test and troubleshoot twisted pair and coaxial cable and connectors

• Certify network speeds up to 1Gbps

• Compare actual hardware against defined network requirements

• Easy-to-use 3.5 inch color touch screen

• Testers support bench top use with kickstand, handheld use and hanging strap use

• Field upgradeable firmware

• Lithium-ion batteries

• Built-in RJ45 (twisted pair) and F (coaxial) connectors

• Includes soft-style case and accessories

Network Testing Features

• Port discovery

• PoE detection with load testing for voltage drop

• PoE end-span and mid-span pair detection

• Ping to a specific IP or URL address (up to 8 targets simultaneously)

• Link light triggering to identify network device connections and ports

• DHCP connectivity and DNS verification

• CDP and LLDP protocol discovery

• Network mapping

• VLAN discovery

• Traceroute diagnostics and mapping

• IPV4 support

• Network speed certification to IEEE 802.3 standards

Cable & Connector Testing Features

• 100Mbps and 1Gbps bit error rate testing (BERT)

• Signal to noise ratio (SNR) testing including attenuation, amplitude and loss

• Skew testing

• Cable pair length measurement (in feet and meters)

• Cable termination testing with wire-mapping

• Length to open and short testing

• Continuity testing for twisted pair and coax

• Tone generation

• Echo (return loss) testing

• Cable identification for twisted pair and coax (up to 20 locations)

• Network testing and identification (up to 8 remotes)

• Save and export test results

• Cable testing to TIA568A/B standards

Package Contents

• 1 x main tester

• 1 x remote tester

• 2 x power supplies

• 1 x 8GB SD memory card

• 1 x micro USB cable

• 2 x 12 inch CAT5E network patch cables

• 2 x RJ45 to 8 way alligator clips

• 2 x RJ45 port savers

• 2 x hanging straps and clips

• 1 x F connector

• 1 x F to BNC adaptor

• 1 x roll-up hanging pouch

• 1 x hard case