ROBOfiber FC-1002-PSE Gigabit Ethernet 2x 10/100/1000BaseTx to SFP slot fiber media converter with PoE+ 60W PSE
Unit Requires:
(1) 1GB single mode or multi mode SFP Module
Find them here
Product Information
Documents
Note: This Gigabit media converter does NOT include the SFP transceiver module.
Product Description
The FC-1002-PSE is a Gigabit Ethernet 2x 10/100/1000Base-T to 100/1000Base-X non-managed stand-alone media converter, equipped with DIP switches for configuration options. The SFP slot allows both Gigabit and Fast Ethernet operation and can take any type of SFP: multi-mode, single-mode, CWDM or DWDM as well as BiDi which allows bi-directional transmissions using only a single fiber strand cable. DIP switches allow settings of fiber port speed, LFP function or transparent or switching converter operating modes. LED indicators signal the power status, UTP and FX ports speed and Link status of each port.
The FC-1002-PSE Gigabit Ethernet is an extremely versatile optical fiber media converter for 10/100/1000Base-Tx copper to 100/1000Base-X (Fast/Gigabit) SFP slot. Any 1000Base-SX/LX/LHX/ZX or WDM/CWDM SFP transceiver as well as 155M Fast Ethernet SFP can be installed in the media converter. Unit has a separate AC power supply. The FC-1002-PSE Gigabit fiber media converter is equipped with a PoE+ injector compatible with 802.3af/at Power over Ethernet standards that allows connection of any PoE device such as IP phones or IP surveillance cameras, eliminating the need of remote powering or additional cabling.
ssf-sfp-rj45.
Technical specifications
| Interfaces: | Two RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T and SFP slot for 802.3z 1000Base- SX/LX/ZX standards or 100Base-X 802.3u |
| Connectors: | 2x RJ-45 copper 10/100/1000 Mbps and SFP slot 100/1000Mbps |
| UTP port: | MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 1632 bytes, provides PoE 802.3af/802.3at standards with 30W max power budget for externally powered PoE devices |
| Optical slot: | Small Form Pluggable – supports Auto and Forced mode operation |
| Front LEDs: | PWR, Fiber Link/Act, TP1 & TP2 Link, TP1 & TP2 Speed, P1 and P2 PoE status |
| Power: | separate 65W AC power, 3 pin cord, US type main plug |
| Temperature: | 0-50°C (Operating); -10-70°C (Storage) |
| Humidity: | 20-80% non condensing (Operating); 0-90% (Storage) |
| Consumption: | less than 65W (at full PoE+ consumption) |
| Dimensions(WxDxH): | 94mm x 71mm x 26mm not including AC adapter |
| Weight: | Converter: 205g, AC adapter: 205g |
| Compliance: | CE, FCC Class A |
| MTBF: | 65,000 hours |
Note: To have a complete Gigabit media converter, you must also order an SFP transceiver module together with the FC-1002-PSE converter. Please visit the SFP transceiver module page or contact our sales department by e-mail or telephone.
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 3.5 × 3.5 × 3 in |
