ROBOfiber HC-SERIAL-SFP – 1x RS-232 and 1x RS-485/422 over fiber (SFP slot) industrial media converter
Purchase (2) Units for transmit & receive over fiber
Requires: (1) 1GB single mode or multi mode SFP Module for each unit
Find them here
Product Information
Documents
Note: For the HC-SERIAL-SFP converter a 155M rated (OC3) SFP transceiver must be used. Any 155M SFP (100Base-FX) can be used: multimode, singlemode, BiDi, CWDM or DWDM with reach up to 160Km are available on the market.
Product description
The HC-SERIAL-SFP is an industrial grade fiber media converter that provides a rugged solution to extend asynchronous RS-232, RS-485 or RS-422 serial transmissions over a fiber optic circuit. The converter is capable of transporting both RS-232 and RS-485-422 interfaces simultaneously and indecently of one another. Interfaces for connection to RS-232 (3 wire) and RS-485 (2 or 4 wire, half or full duplex)/RS-422 (4 wire, full duplex) and available separately on the 7 pin block connector on the front panel of the media converter. The HC-SERIAL-SFP Series secures asynchronous serial data transmissions over EMI resistant fiber at speeds up to 256kbps. HC-SERIAL-SFP media converter features two redundant DC power inputs. The media converter’s industrial design is perfect for keeping your industrial automation applications running smoothly and continuously. The HC-SERIAL-SFP media converter is available with an extended -40° to 75°C operating temperature range.
Features
Wide temperature -40°C~75°C
Extend serial transmission distance up to 120km, depending on the SFP transceiver used
Redundant dual power inputs (12~60VDC)
Supports RS-232 and RS-422/485(2/4 wire) simultaneous transmission over fiber
Enhanced serial baud rate up to 256kpbs
8KV isolation for serial signal
Hardened housing with IP30 protection
Fan-less and DIN-Rail design for harsh industrial environment
Adjustable pull high/low resistor and terminator for RS-422/485 transmission
Technical specifications
Interfaces: | 7 pin screw block connector for RS-485/RS-232/RS-422 serial asynchronous port and SFP slot for 155M fiber port |
Operating wavelength: | dictated by the 155M SFP used |
Operating distance: | up to 120Km depending on the SFP used |
Optical connector: | LC, depending on the SFP model either simplex or duplex |
Front LEDs: | PWR, Fiber Link, TD 232, RD 232, Tx 485, Rx 485 |
Power: | dual DC 12~60V input power supplies (screw block connector) |
Temperature: | -10~60°C (Operating); -40~75°C (Extended Range) |
Humidity: | 5~95% non condensing |
Consumption: | less than 3W |
Dimensions(WxDxH): | 118 x 88 x 33mm |
Weight: | 370g |
Compliance: | CE, FCC Class A, EMI: EN55022 Class A, Vibration : IEC 60068-2-6 Shock : IEC 60068-2-27, Free Fall : IEC 60068-2-32 |
MTBF: | 100,000 hours |
Additional information
Weight | .75 lbs |
---|---|
Dimensions | 6 × 5 × 2 in |